TJERNLUND SIDESHOT SS1 / SS1C DELUXE OIL & GAS SIDE WALL VENTING SYSTEMS
Normal Price: $0.00
Our Price: $794.59
Our Price: $794.59
Tjernlund SIDESHOT SS1 / SS1C DELUXE OIL & GAS SIDE WALL VENTING SYSTEMS. Eliminates need for chimney venting. Saves on installation and repair of chase and chimney while increasing living space. No pre-installation assembly required. Includes UC1 Burner Interlock Control.
THIS PRODUCT SHOULD BE INSTALLED BY A QUALIFIED HVAC CONTRACTOR.
TJERNLUND SS1 / SS1C VENTING SYSTEM PRODUCT FEATURES
Easy, One-Person Installation. No pre-assembly required. Mechanical & Electrical assemblies are located on the back of the unit and are attached after vent termination is installed. This reduces weight during installation and maximizes serviceability.
Zero Clearance installation to combustibles. Patented High-Velocity Exhaust prevents building exterior staining. Quiet Operation with vibration absorbing mounting brackets. Energy efficient. Weather protected operating components.
Tjernlund Model SS1 features a bottom or rear 6" vent pipe connection.
MODELS SS1 (Oil & Gas) / SS1C (Oil Only) APPLICATION GUIDE
NOTE: Verify that the total BTU/hr. input of the heating appliance(s) fall within the proper catagory listed. The maximum equivalent feet and capacity differs between the SS1 and SS1C. To determine equivalent feet - add the total length of straight pipe plus 10 feet for each 90 degree elbow and 5 feet for each 45 degree elbow. Vent runs over 15 linear feet should use an approved, insulated vent connector to prevent sulfur condensation problems.
MODEL SS1 - For capacities up to 220,00 BTU/hr. Natural / LP Gas - 50,000 to 160,00 BTU/hr. Flame Retention Oil Burner - 70,000 to 220,000 BTU/hr. Standard Oil Burner - 70,000 to 180,000 BTU/hr.
MODEL SS1C - (Oil Only) For capacities up to 315,000 BTU/hr. (Canada Approved) Flame Retention Oil Burner - 50,000 to 315,000 BTU/hr. Standard Oil Burner - 50,000 to 223,000 BTU/hr.
CALCULATE OIL BTU/hr. INPUT ON NOZZLE SIZE AND ACTUAL PUMP PRESSURE.
TJERNLUND SS1 / SS1C INCLUDE UC1 BURNER INTERLOCK CONTROL.
Simplifies new installations and service calls.
Operation and wiring interlock problems are diagnosed and displayed with LED indicators.
Adjustable Pre / Post purge. Prover switch delay eliminates burner start up or wind induced prover switch short cycling.
Interlock voltage can be selected (24 or 115VAC). Eliminates false triggering by burner monitoring circuits.
FOR ADDITIONAL TECHNICAL & INSTALLATION INFORMATION VISIT TJERNLUND WEBSITE AT WWW.TJERNLUND.COM. CLICK ON DOCUMENT LIBRARY.